型号 封装 在线定购
P89V51RC2FA(查看) PLCC44
P89V51RC2FN(查看) DIP40


技术资料—— P89V51RC2 PDF技术资料

P89V51RC2 概述

The P89V51RC2 are 80C51 microcontrollers with 32 kB flash and 1024 B of data RAM.

A key feature of the P89V51RC2 is its X2 mode option. The design engineer can choose to run the application with the conventional 80C51 clock rate (12 clocks per machine cycle) or select the X2 mode (six clocks per machine cycle) to achieve twice the throughput at the same clock frequency. Another way to benefit from this feature is to keep the same performance by reducing the clock frequency by half, thus dramatically reducing the EMI.

The P89V51RC2 is also capable of IAP, allowing the flash program memory to be reconfigured even while the application is running.

P89V51RC2 参数
P89V51RC2 存储器
FLASH (kB)   32
RAM (B)   1024
EEPROM (B)   -
P89V51RC2 其他参数
fmax (MHz)   40
UART   1
I²C   -
SPI   1
ADC   -
DAC   -
Timers   3
PWM   1
VDD (V)   4.5-5.5
P89V51RC2 封装与引脚

P89V51RC2 特性

  • 80C51 CPU
  • 5 V operating voltage from 0 MHz to 40 MHz
  • 32 kB of on-chip flash user code memory with ISP and IAP
  • Supports 12-clock (default) or 6-clock mode selection via software or ISP
  • SPI and enhanced UART
  • PCA with PWM and capture/compare functions
  • Four 8-bit I/O ports with three high-current port 1 pins (16 mA each)
  • Three 16-bit timers/counters
  • Programmable watchdog timer
  • Eight interrupt sources with four priority levels
  • Second DPTR register
  • Low EMI mode (ALE inhibit)
  • TTL- and CMOS-compatible logic levels
  • Brownout detection
  • Low power modes
    • Power-down mode with external interrupt wake-up
    • Idle mode
  • DIP40, PLCC44 and TQFP44 packages