立即注册 找回密码

微雪课堂

搜索
微雪课堂 AVR 解读Atmel AVR单片机 查看内容

ATmega128与ATmega128A 区别

2015-5-26 16:42| 发布者: kaloha| 查看: 6341| 评论: 0

摘要: ATmega128系列过去的型号都停产了,目前都是新型号ATmega128A系列来替代。以下是官方提供的相关区别说明:

1 Introduction
In order to optimize the manufacturing process and to further reduce current consumption, an optimized version of ATmega128 has been introduced. 

The ATmega128A is a functionally identical, drop-in replacement for the ATmega128.All devices are subject to the same qualification process and same set of production tests, but as the manufacturing process is not the same some electrical characteristics differ. 

ATmega128 and ATmega128A have separate datasheets. This application note outlines the differences between the two devices and the datasheets. There is also a detailed change log to assist the user at the end of the ATmega128A datasheet. Remember to always use the latest revision of the device datasheet. 

Minor differences in typical characteristics are not discussed in this document as long as the low and high limits remain the same. For detailed information about the typical characteristics, see sections “Electrical Characteristics” and “Typical Characteristics” of the device datasheets. 

Note: This application note serves as a guide to ease migration. For complete device details, always refer to the most recent version of the ATmega128A datasheet.

2 Changes in Characteristics
This section outlines major differences in characteristics that may have an effect on the application in which the device is used. For detailed information, refer to the most recent version of the device datasheets.

2.1 Current Consumption
Active and Idle mode current consumption of the device has been reduced significantly. The tables below present typical current consumption figures at room temperature. All values are taken from device datasheets, unless otherwise noted.

ATmega128与ATmega128A 区别_电流消耗

2.2 VOL Levels 
In Table 2-2 are listed differences in output low and high voltage levels.

ATmega128与ATmega128A 区别_输出电压

2.3 Reset Pull-Up 
Table 2-3 summarizes the differences between the reset pull-up of ATmega128 and that of ATmega128A.

ATmega128与ATmega128A 区别_复位上拉

3 Datasheet Changes
For a summary of changes, see the revision history at the end of the ATmega128A data sheet.

ATmega128与ATmega128A 区别

——

以上资料由微雪电子整理并发布,未经许可不得转载,否则追究相应责任!


469

顶一下

刚表态过的朋友 (469 人)

最新评论

所有教程
AVR

微雪官网|产品资料|手机版|小黑屋|微雪课堂. ( 粤ICP备05067009号 )

GMT+8, 2024-3-29 14:13 , Processed in 0.043579 second(s), 20 queries .

返回顶部