TPS61070

芯片信息

型号 封装 在线定购
TPS61070DDCR(查看) SOT6

引脚布局

(点击图片看大图)
技术资料—— TPS61070 PDF技术资料

TPS61070 概述

The TPS61070 devices provide a power supply solution for products powered by either a one-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-ion or Li-polymer battery. Output currents can go as high as 75 mA while using a single-cell alkaline, and discharge it down to 0.9 V. The TPS61070 can also be used for generating 5 V at 200 mA from a 3.3 V rail or a Li-ion battery. The boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the TPS61070 enter the power-save mode to maintain a high efficiency over a wide load current range.

TPS61070 参数
TPS61070 基本参数
Vin (V)   0.9~5.5
Vout (V)   1.8~5.5
TPS61070 其他特性
可调输出端   1
Iq (Typ)(mA)   0.019
TPS61070 封装与引脚
SOT6

TPS61070 特性

  • 90% Efficient Synchronous Boost Converter
    • 75-mA Output Current at 3.3 V From 0.9-V Input
    • 150-mA Output Current at 3.3 V From 1.8-V Input
  • Device Quiescent Current: 19 µA (Typ)
  • Input Voltage Range: 0.9 V to 5.5 V
  • Adjustable Output Voltage Up to 5.5 V
  • Power-Save Mode Version Available for
    Improved Efficiency at Low Output Power
  • Load Disconnect During Shutdown
  • Overtemperature Protection
  • Small 6-Pin Thin SOT23 Package

TPS61070 应用

  • All One-Cell, Two-Cell, and Three-Cell Alkaline,
    NiCd or NiMH or Single-Cell Li Battery-Powered Products
  • Portable Audio Players
  • PDAs
  • Cellular Phones
  • Personal Medical Products
  • White LED Lighting