TPS61010

芯片信息

型号 封装 在线定购
TPS61010DGSR(查看) MSOP10

引脚布局

(点击图片看大图)
技术资料—— TPS61010 PDF技术资料

TPS61010 概述

The TPS61010 devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery.

The TPS61010 output voltage can be adjusted from 1.5 V to a maximum of 3.3 V, by an external resistor divider or, is fixed internally on the chip. The TPS61010 provide an output current of 200 mA with a supply voltage of only 0.9 V. The TPS61010 starts up into a full load with a supply voltage of only 0.9 V and stays in operation with supply voltages down to 0.8 V.

The TPS61010 is packaged in the micro-small space saving 10-pin MSOP package. The TPS61010 is also available in a 3 mm x 3 mm 10-pin QFN package.

TPS61010 参数
TPS61010 基本参数
Vin (V)   0.8~3.3
Vout (V)   1.5~3.3
TPS61010 其他特性
可调输出端   1
Iq (Typ)(mA)   0.05
TPS61010 封装与引脚
MSOP10, SON10

TPS61010 特性

  • Integrated Synchronous Rectifier for Highest Power Conversion Efficiency (>95%)
  • Start-Up Into Full Load With Supply Voltages as Low as 0.9 V, Operating Down to 0.8 V
  • 200-mA Output Current From 0.9-V Supply
  • Powersave-Mode for Improved Efficiency at Low Output Currents
  • Autodischarge Allows to Discharge Output Capacitor During Shutdown
  • Device Quiescent Current Less Than 50 µA
  • Ease-of-Use Through Isolation of Load From Battery During Shutdown of Converter
  • Integrated Antiringing Switch Across Inductor
  • Integrated Low Battery Comparator
  • Micro-Small 10-Pin MSOP or 3 mm x 3 mm QFN Package

TPS61010 应用

  • All Single- or Dual-Cell Battery Operated Products Like Internet Audio Players, Pager, Portable Medical Diagnostic Equipment, Remote Control, Wireless Headsets