logo

LPC2148

订购信息

型号 封装 在线定购
LPC2148FBD64(查看) LQFP64

引脚布局

(点击图片看大图)
技术资料—— LPC2148 PDF技术资料

LPC2148 概述

The LPC2148 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine the microcontroller with embedded high-speed flash memory of 512 kB. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

Due to their tiny size and low power consumption, LPC2148 are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. Serial communications interfaces ranging from a USB 2.0 Full-speed device, multiple UARTs, SPI, SSP to I2C-bus and on-chip SRAM of 40 kB, make the LPC2148 very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing both large buffer size and high processing power. Various 32-bit timers, single or dual 10-bit ADC(s), 10-bit DAC, PWM channels and 45 fast GPIO lines with up to nine edge or level sensitive external interrupt pins make the LPC2148 suitable for industrial control and medical systems.

LPC2148 参数
LPC2148 存储器
FLASH (kB) 512
RAM (kB) 40
LPC2148 性能参数
fmax (MHz) 60
I/Opins 45
UART 2
I²C 2
SPI 1
SSP 1
ADC 14
DAC 1
定时器 3
PWM 6
I/O 电压 (V) 3.3
CPU 电压 (V) 3.3
LPC2148 封装与引脚
LQFP64