微雪电子

Ethernet DP83848C

DP83848C

芯片信息

型号	封装	在线定购
DP83848CVV（查看）	LQFP48

引脚布局

（点击图片看大图）

技术资料—— DP83848C PDF技术资料

DP83848C 概述 The DP83848C is a robust fully featured 10/100 single port Physical Layer device offering low power consumption, including several intelligent power down states. These low power modes increase overall product reliability due to decreased power dissipation. Supporting multiple intelligent power modes allows the application to use the absolute minimum amount of power needed for operation. The DP83848C includes a 25MHz clock out. This means that the application can be designed with a minimum of external parts, which in turn results in the lowest possible total cost of the solution. The DP83848C easily interfaces to twisted pair media via an external transformer. Both MII and RMII are supported ensuring ease and flexibility of design. The DP83848C features integrated sublayers to support both 10BASE-T and 100BASE-TX Ethernet protocols, which ensures compatibility and interoperability with all other standards based Ethernet solutions. The DP83848C is offered in a small form factor (48 pin LQFP) so that a minimum of board space is needed. DP83848C 特性
Low-power 3.3V, 0.18µm CMOS technology Low power consumption < 270mW Typical 3.3V MAC Interface DP83848C supports Auto-MDIX for 10/100 Mb/s Energy Detection Mode 25 MHz clock out DP83848C supports SNI Interface (configurable) RMII Rev. 1.2 Interface (configurable) MII Serial Management Interface (MDC and MDIO) IEEE 802.3u MII IEEE 802.3u Auto-Negotiation and Parallel Detection IEEE 802.3u ENDEC, 10BASE-T transceivers and filters DP83848C 应用	IEEE 802.3u PCS, 100BASE-TX transceivers and filters Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation Error-free Operation up to 137 meters Programmable LED support Link, 10 /100 Mb/s Mode, Activity, and Collision Detect Single register access for complete PHY status 10/100 Mb/s packet BIST (Built in Self Test) 48-pin LQFP package (7mm) x (7mm)
High End Peripheral Devices Industrial Controls and Factory Automation General Embedded Applications

DP83848C 概述

The DP83848C is a robust fully featured 10/100 single port Physical Layer device offering low power consumption, including several intelligent power down states. These low power modes increase overall product reliability due to decreased power dissipation. Supporting multiple intelligent power modes allows the application to use the absolute minimum amount of power needed for operation.

The DP83848C includes a 25MHz clock out. This means that the application can be designed with a minimum of external parts, which in turn results in the lowest possible total cost of the solution.

The DP83848C easily interfaces to twisted pair media via an external transformer. Both MII and RMII are supported ensuring ease and flexibility of design.

The DP83848C features integrated sublayers to support both 10BASE-T and 100BASE-TX Ethernet protocols, which ensures compatibility and interoperability with all other standards based Ethernet solutions.

The DP83848C is offered in a small form factor (48 pin LQFP) so that a minimum of board space is needed.

DP83848C 特性

Low-power 3.3V, 0.18µm CMOS technology
Low power consumption < 270mW Typical
3.3V MAC Interface
DP83848C supports Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
25 MHz clock out
DP83848C supports SNI Interface (configurable)
RMII Rev. 1.2 Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters

DP83848C 应用

IEEE 802.3u PCS, 100BASE-TX transceivers and filters
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Error-free Operation up to 137 meters
Programmable LED support Link, 10 /100 Mb/s Mode, Activity, and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
48-pin LQFP package (7mm) x (7mm)

High End Peripheral Devices
Industrial Controls and Factory Automation
General Embedded Applications