CC2511F32
| CC2511F32 存储器 | |
|---|---|
| FLASH (kB) | 32 |
| RAM (kB) | 4 |
| CC2511F32 性能参数 | |
| 工作频率 (Min) | 2400MHz |
| 工作频率 (Max) | 2483.5MHz |
| 器件类型 | System-on-Chip |
| 数据速率 (Max) | 500 (kbps) |
| 工作电压 (V) | 3 to 3.6 |
| RX 电流 (Lowest) | 14.7 (mA) |
| 待机电流 | 0.3 (uA) |
| 唤醒时间 (PD-->RX/TX) | 340 (uS) |
| 调变技术 | 2-FSK,GFSK,MSK |
| 敏感性 (Best) | -103 (dBm) |
| TX 功率 (Max) | 1 (dBm) |
| 可编程输出功率范围 | -30 to 1 (dBm) |
| 天线连接 | Differential |
| CC2511F32 封装与引脚 | |
| QFN36 | |
CC2511F32 概述
The CC2511F32 is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2511F32 combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6×6 mm package makes it very suited for applications with size limitations.
The CC2511F32 is highly suited for systems where very low power consumption is required. This is ensured by several advancedlow-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
CC2511F32 性能
- Radio
- High-performance RF transceiver based on the market-leading CC2500
- Excellent receiver selectivity and blocking performance
- High sensitivity (–103 dBm at 2.4 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 1 dBm for all supported frequencies
- Frequency range: 2400 – 2483.5 MHz
- Digital RSSI/LQI support
- Current Consumption
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud, TX: 16 mA @ –6 dBm output power)
- 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- MCU, Memory, and Peripherals
- High performance and low power 8051 microcontroller core.
- 32 kB in-system programmable flash, and 1/2/4 kB RAM
- Full-Speed USB Controller with 1 kB USB FIFO
- I2S interface
- 7–12 bit ADC with up to eight inputs
- 128-bit AES security coprocessor
- Powerful DMA functionality
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 19 GPIO pins
- General
- Wide supply voltage range (2.0V–3.6V)
- Green package: RoHS compliant and no antimony or bromine, 6×6mm QLP36
- Applications
- 2400–2483.5 MHz ISM/SRD band systems
- Consumer electronics
- Wireless keyboard and mouse
- Wireless voice-quality audio
- RF enabled remote controls
- Wireless sports and leisure equipment
- Low power telemetry
- USB dongles
