型号 封装 在线定购
PIC18F2410-E/ML(查看) QFN28
PIC18F2410-E/SO(查看) SOIC28
PIC18F2410-E/SP(查看) SPDIP28
PIC18F2410-I/ML(查看) QFN28
PIC18F2410-I/SO(查看) SOIC28
PIC18F2410-I/SP(查看) SPDIP28
PIC18F2410T-I/ML(查看) QFN28
PIC18F2410T-I/SO(查看) SOIC28


技术资料—— PIC18F2410 PDF技术资料

PIC18F2410 概述

The PIC18F2410 offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition
of high-endurance, Flash program memory. On top of these features, the PIC18F2410 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance, power sensitive applications.

PIC18F2410 参数
PIC18F2410 存储器
Flash (KB) 16
RAM (Bytes) 768
Data EEPROM (bytes) -
PIC18F2410 其他参数
程序存储器类型 Flash
CPU速率 (MIPS) 10
数字通信模块 1-A/E/USART,
捕捉/比较/PWM 模块 2 CCP
定时器 1 x 8-bit
3 x 16-bit
ADC 10 ch, 10-bit
比较器 2
工作电压 (V) 2 to 5.5
PIC18F2410 封装与引脚

PIC18F2410 特性

  • CPU
    • Up to 10 MIPS performance
    • C compiler optimized RISC architecture
    • 8 x 8 Single Cycle Hardware Multiply
    • Internal oscillator support 31 kHz to 8 MHz
    • Fail-Safe Clock Monitor – allows safe shutdown if clock fails
    • Watchdog Timer with separate RC oscillator
    • Wide operating Voltage range; 2.0V to 5.5V
    nanoWatt Power Managed Modes
    • Run, Idle and Sleep modes
    • Idle mode currents down to 5.8uA typical
    • Sleep mode currents down to 0.1uA typical
    Analog Features
    • 10-bit ADC, 10 channels, 100K samples per second
    • Programmable Low Voltage Detection Module
    • Programmable Brown-out Reset module
    • Two Analog comparators with input multiplexing
    • Master Synchronous Serial Port supports SPI ™ and I2C™ Master and Slave Mode
    • EUSART module including LIN bus support
    • Four Timer Modules
    • Up to 2 PWM outputs
    • Up to 2 Capture / Compare