LPC2292

芯片信息

型号 封装 在线定购
LPC2292FBD144(查看) LQFP144

引脚布局

(点击图片看大图)
技术资料—— LPC2292 PDF技术资料

LPC2292 概述

The LPC2292 microcontroller is based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

With its 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, 2 advanced CAN channels, PWM channels and up to nine external interrupt pins the LPC2292 is particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. The number of available GPIOs ranges from 76 (with external memory) through 112 (single-chip). With a wide range of additional serial communications interfaces, the LPC2292 is also suited for communication gateways and protocol converters as well as many other general-purpose applications.

LPC2292 参数
LPC2292 存储器
FLASH (kB) 256
RAM (kB) 16
LPC2292 性能参数
fmax (MHz) 60
I/Opins 112
UART 2
I²C 1
I²S -
SPI 2
SSP -
ADC 8
DAC -
定时器 3
PWM 6
I/O 电压 (V) 3.3
CPU 电压 (V) 1.8
LPC2292 封装与引脚
LQFP144